Skip to content
Tutorials
Quickstart - Apple VZ (vfkit)

Quickstart - Apple VZ (vfkit)

title: Quickstart — Apple VZ (vfkit)

Quickstart — Apple VZ via vfkit

The Path C / menu-then-reboot flow on Apple Silicon. We’ll use vfkit — Apple’s officially supported front-end for Virtualization.framework — to boot an immutable boot.iso against a writable menu-cache.raw cache disk, then reboot into Debian Trixie.

Why this and not Path A 

VZ traps kexec_file_load(2)  →  Path A is out
VZ firmware has no HTTP/TCP/DHCP/DNS  →  Path B can't fetch plans
                                          (the loader's networked phases
                                          D–J were abandoned for VZ)
Path C: networking + FS walks happen in a Linux kernel
        target loaded by firmware on next pass via BootOrder  →  ✓

See Architecture / hypervisors for the protocol matrix and a longer discussion.

1. Install vfkit + dependencies 

brew install vfkit qemu xorriso mtools dosfstools

(QEMU is used as a build-time helper for the host-side tools; the runtime is vfkit.)

2. Build the immutable boot.iso 

cd cloud-boot/uki
go run . build \
    --arch aarch64 \
    --iso  boot.iso \
    --cmdline "cloudboot.exit=reboot cloudboot.plan=oci://ghcr.io/me/cloud-plan:prod"

The output is a hybrid GPT/El-Torito ISO. The El-Torito boot catalogue points at the UKI on the appended GPT FAT partition, so the same file boots equally from CD-ROM emulation, USB, or as a virtio-blk read-only disk.

3. Build the writable cache disk 

cd cloud-boot/uki/scripts
./make-cache-disk.sh ../menu-cache.raw 256

This creates a 256 MiB GPT disk with one FAT32 partition labelled cloud-boot-cache. The label is what cloud-boot-init looks for when staging targets. The script is idempotent — re-running it won’t clobber existing Boot#### entries.

4. Boot 

cd cloud-boot
vfkit \
    --bootloader efi,variable-store=nvram.fd \
    --device virtio-blk,path=uki/boot.iso,readonly \
    --device virtio-blk,path=uki/menu-cache.raw \
    --device virtio-blk,path=trixie.raw \
    --device virtio-net,nat,mac=auto \
    --device virtio-serial,logFilePath=vm.log

What happens:

  1. Firmware loads \EFI\BOOT\BOOTAA64.EFI from boot.iso (UKI).
  2. UKI runs cloud-boot-init as PID 1.
  3. virtio-net comes up, init fetches the plan over OCI.
  4. The plan resolves to a target with disk source pointing at /dev/vda3 (or whichever virtio-blk index Trixie landed at).
  5. cloud-boot-init reads /boot/vmlinuz-* and /boot/initrd.img-* via the ext4 userland driver, writes them to \EFI\Linux\<target>-vmlinuz.efi + <target>-initrd on the cache ESP.
  6. Writes Boot0001 (LoadOption pointing at <target>-vmlinuz.efi with initrd=<target>-initrd <cmdline> as load options) and BootOrder = [0001, ...existing] via efivarfs.
  7. reboot(LINUX_REBOOT_CMD_RESTART).
  8. vfkit restarts. UEFI Boot Manager honours BootOrder, runs <target>-vmlinuz.efi from the cache ESP, distro kernel takes over via ExitBootServices.

You’ll see the bootstrap kernel boot once, then the Trixie kernel boots immediately on the second pass — no second cloud-boot-init run.

5. --gui framebuffer console

vfkit can show the guest’s framebuffer in a Cocoa window if the guest kernel ships the right virtio-gpu drivers. The cloud kernel variant already has them; see kernel/cloud-arm64.config:

CONFIG_DRM_VIRTIO_GPU=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_VIRTIO_INPUT=y
vfkit --gui \
    --bootloader efi,variable-store=nvram.fd \
    --device virtio-blk,path=uki/boot.iso,readonly \
    --device virtio-blk,path=uki/menu-cache.raw \
    --device virtio-blk,path=trixie.raw \
    --device virtio-net,nat,mac=auto

A vfkit window opens showing the boot console. Useful for keyboard-driven menus — cloudboot.exit=reboot without an explicit cloudboot.target= puts the user at an interactive menu.

6. Reset to the menu

Once a target has been staged, the firmware will keep booting it. To go back to the menu (e.g. to pick a different target), clear the NVRAM:

cd /sys/firmware/efi/efivars
sudo efibootmgr -b 0001 -B
sudo efibootmgr --bootorder $(efibootmgr | sed -n 's/^BootOrder: //p' | sed 's/0001,*//; s/,*0001//' )
sudo reboot

Or use the convenience script uki/scripts/reset-cloud-boot.sh.

Troubleshooting

SymptomLikely cause
vfkit: error: bootloader: file not found: nvram.fdFirst run — vfkit creates nvram.fd automatically; re-run.
Bootstrap kernel hangs at [init] virtio-net: timeoutPlan URL unreachable. Confirm --device virtio-net,nat,mac=auto is present, that the host has internet, and that the registry doesn’t require auth that you haven’t supplied.
Second-pass kernel doesn’t appear, vfkit keeps re-booting the UKIThe Boot0001 write failed. Check cloud-boot-init logs in vm.log. Common cause: menu-cache.raw doesn’t have the cloud-boot-cache partition label. Re-run make-cache-disk.sh.
findESPDevice: no partition labelled cloud-boot-cacheSame as above.

Next

Quickstart - QEMU/KVMOpenStack with Keystone AC